mag portal iptv

What is MAG Portal? Everything You Need To Know About MAG Portal IPTV

The MAG Portal connects your MAG device to IPTV feeds and provides all of the necessary information.

What is MAG?

The MAG is a widely used IPTV device. Infomir began making Set-Top Boxes under the MAG brand after 2007. You can use these Set-Top Boxes to quickly organize your media content and access IPTV services.

What is a Stalker Portal in MAG?

Using a MAG stalker portal, you can connect your MAG device to the IPTV feeds and receive all the information you need to watch IPTV content on your TV set.

What is the MAG Inner Portal?

The inner portal is a piece of software built into MAG boxes that allows you to access a variety of extra features such as an Internet browser, games, and so on.

How to Switch From Inner to Outer Portal in MAG?

Your MAG box’s settings menu has a “Change to Inner portal” or “Change to Outer portal” button that you can click on to switch between the two modes. If you want to add IPTV channels to your MAG device, you can do so by using the inner portal and entering the portal address provided by your IPTV provider.

How to Change Portal Address on MAG?

Unplug the cable that connects the router to the box and turn it off.

  1. Turn the box on without the modem cable.
  2. Wait for the “Loading Portal” to appear on the screen before continuing.
  3. Press the “SET” button on your remote control.
  4. Press the “OK” button in the Settings.
  5. Press the “SET” button on the remote control again.
  6. Go down to Servers and press “OK“.
  7. Remove every single word from the URL for Portal 1. (to delete use the back button on the remote).
  8. Select “KB” in the upper right corner of the remote control. It has the appearance of a keyboard in a graphical representation.
  9. This is where you’ll put the portal’s new URL.
  10. “KB” button on the remote control to select “OK” at bottom of the screen.
  11. Restart the TV box with the power supply or the reload portal after connecting the cable from the box to the modem.

How to Add Mag IPTV Portal URL On Your Mag STB?

With an activated MAC Address from your provider’s IPTV service, as well as Mag’s internet connection, you can now begin watching content. You’re probably wondering how to add an IPTV portal URL to Mag STB. Keep calm and carry on reading.

  1. Press Menu and navigate to open the System Settings.
  2. Navigate to the Servers option, and press the OK button to open.
  3. Over there, select the “Portals” option to open.
  4. The IPTV Portal URL can be added or changed from the service provider’s portal menu in the Portal menu. In the Portal 1 box, you can enter any name you like. Input the IPTV Portal address provided by your provider into the Portal 1 URL field for the service you purchased.
  5. To save it, scroll down. Enter nothing in the Portal 2 username or URL text boxes. With multiple IPTV server subscriptions, you can use the next Portal and URL space to pick between the two IPTV servers, if desired.
  6. Once you’ve done that, press the exit key.
  7. To do this, use the System menu.
  8. Restart the portal by clicking on the option.
  9. A yellow loading bar would appear if all of your internet settings were correct and the portal URL was entered correctly.

How to Install Smart TV App on MAG 250, 254, 256?

  • Click on “settings” after the main portal screen appears
  • Go to “System Settings
  • Select “Servers
  • Go to “Portals
  • Enter as:
    • Portal 1 Name: Portal
    • Portal 1 URL:
  • Click “OK”, Save Settings, and exit
  • Portal Resolution Click on “Video” in System Settings
  • Set:
    • Video output mode: 1080i-60
    • Graphic resolution: 1280×720
  • Click “OK” exit and reboot your device to apply settings

How to Add a New IPTV Server to the Portal?

  • A new IPTV service provider can be added by following these steps.
  • To continue, use the directional buttons on your remote control to scroll left until you see the “Settings” option, then press the “OK” button.
  • With your remote, scroll down to “Reload Portal,” then press “OK” on the next screen.
  • At this point, a pop-up message will appear asking if you want to restart the portal. To confirm, use the directional keys on your remote to select “OK” and then press the “OK” button.
  • The portal is now being relaunched. It should only take a few seconds to complete this task.
  • Options such as “Embedded Portal,” “Saved Servers” and “System Settings” can be found on the portal’s black background with yellow icons. On your remote’s scroll wheel, locate “System Settings” and press the OK button.
  • Select “Servers” from the “System settings” menu on your remote control and press “OK
  • Scroll to “Portals” and press “OK” on the following screen using the direction buttons on your remote.
  • The information about the previously saved portals, such as the “Portal name” and “Portal URL” should now appear in your MAG box.
    Enter the new portal information provided by your IPTV service provider in the free Portal slot on your set-top box.
  • Press the “Home” button on your remote several times to return to the “Select a portal for loading” screen.
  • All that’s left is for you to select a portal with your remote and then press “OK
  • The portal you selected will now begin to load. Please double-check your settings and try again using the instructions above if it does not load.
Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like
install iptv on enigma2

Install IPTV on Enigma 2

Setup ALLIPTVWORLD on Enigma2, Dreambox, Vu+ 1- Go to your Enigma2 and get your IP address Go to Settings/Setup/System Network Device Setup Adapter Settings And get your IP address it starts…
View Post
install iptv on magbox

Install IPTV on MAGBOX

This tutorial will guide you through the simple setup instruction for STB Emulator.‘STB Emulator’ can emulate the following IPTV set-top boxes. IPTV Set-top Box Support MAG 200 Yes MAG 245 Yes…
View Post